Novatek PHS3HDL 3SH Heavy Duty Triple Scaling Hammer, Long Handle – 3 x 2500 BPM
$571.20
The Novatek PHS3HDL is a long-handle 3SH heavy duty triple-head scaling hammer for concrete take-down and coating removal. 3 x 2500 blows per minute, 14 cfm.
Novatek PHS3HDL 3SH Heavy Duty...
$571.20
Overview
The Novatek PHS3HDL is the long-handle version of Novatek’s 3SH heavy duty triple-head scaling hammer. It complements Novatek needle scalers in more demanding work: rapid take-down of concrete, removal of high-build coatings, texturing concrete, and removing rust, epoxy and non-skid coatings from steel or concrete.
Key Features
- Hard hitting at 2500 blows per minute per piston to fracture thick coatings
- Tungsten carbide cruciform or bush hammer single-piece piston heads
- Nylon brush seals clean pistons on every stroke and help extend piston life
- Screw top cap for simple head and piston replacement
- Two live air inlets allow inline or perpendicular handle configurations
Specifications
| Specification | Value |
|---|---|
| Part number | PHS3HDL |
| Heads | Triple |
| Handle | Long |
| Blows per minute | 3 x 2500 |
| Air consumption | 14 cfm (408 lpm) |
| Cylinder bore | 1.06″ |
| Piston stroke | 1.04″ |
| Length | 18″ (457 mm) |
| Weight | 14 lbs |
Applications
Cruciform head: concrete take-down, coating, non-skid and epoxy removal, pack rust and laminar rust. Bush hammer head: texturing concrete, aggregate exposure for bonding overlayments, removing loose material for crack and joint repair.
Related products
Questions about drying, dehumidification, or restoration equipment? Our specialists are here to help.
Call 719-240-4930