Call us! (719) 372-0990

Understanding Your Dehumidifier Specs

When checking out the specs on a dehumidifier, you’ll usually find listed under the section “Water Removal” two numbers. One is noted as AHAM (Association of Home Appliance Manufacturers) and one is “Capacity at Saturation”. But what do these numbers represent and how are they calculated?

Association of Home Appliance Manufacturers

AHAM certifies that the PPD (Pints per day) a manu-facturer claims their product will remove is accurate. All dehu’s are tested in a controlled environment where the temperature is 80°F with a relative humidity of 60%. The units are run for 24 hours and the measured amount of extracted water becomes the official AHAM rating.

But even though each dehu is tested the same, the problem is that real world conditions are many times quite different. There have also been questions about whether the ratings that are being applied to “Home” appliances should have any bearing on the type of commercial units that you employ. And that’s where the “saturation” number becomes important.

Capacity at Saturation

Saturation can best be described as any extreme condition where the amount of moisture that is in the air is so high that a dehu is forced to run continually over a 24 hour period (100% RH). Situations like this might arise with flooded basements or natural disasters like hurricanes. So the saturation PPD rating will be at the top end of your dehu’s capability.

There exist a sizable number of temperature/humidity combinations that occur naturally or are due to the use of heat drying that causes faster evaporation. These all affect a dehumidifiers performance. Having more than two test conditions listed in the unit’s specs could give you a better idea of its overall performance, but that’s not likely to happen. But having some understanding of its performance capacity will help to ensure you’ve got the right sized unit on the job.

Comments are closed.

First Choice Equipment Sales & Service

Your premier choice for restoration and renovation specialists. Call 24 hours a day, 7 days a week for emergency service or equipment at (719) 372-0990 or contact us for more information. You can rely on First Choice to be the best choice!

Selling Quality Products by

Bry Air, DESICair, Magnum, OmniAire, Omniflow, OmniGuard, Phoenix, Stulz, Titan, Vapair, and Viking. Selling desiccants, air scrubbers, air movers, and other drying equipment products throughout the state of Colorado and the entire United States.

Find us

First Choice Drying Equipment and Sales
906 L. Street
Penrose, Colorado 81240

Areas of Service

We serve customers across the entire United States.

Contact Us

Wade Lauhon
Cell: (719) 240-4929
firstchoiceequipment@bresnan.net


Beth Hinton
Cell: (719) 240-4930
beth.firstchoice@gmail.com

Stay Connected